The Vision.Net DIN Rail Rack Mount Trays allow easy installation of DIN rail mountable Vision.Net modules in an equipment rack. Vision.Net trays are available in horizontal or vertical mounting orientations. The vertical mount tray offers easy viewing of a single 35mm DIN rail, and is great for mounting in shallow-depth racks. For larger installations, the horizontal mount tray includes three DIN rails. Both tray versions are 3U sized rack trays and include a blanking cover.
To hold components in place without the use of screws in electrical enclosures, DIN Rails are the way to go. Manufactured to the highest levels of quality, we offer a comprehensive line of competitively priced DIN rail at Industrial Control Direct. Electrolitically plated according to 2002/95 EC RoHS Directive, these rails are available in cold rolled steel and aluminum varieties.
There can be vast differences in the quality of DIN Rails. The international standards are often not met by many suppliers. This results in DIN rails that rust or do not fit properly into most cutters. To be sure you are not getting an inferior quality rail, make sure the supplier is specifically listing the standards to which the DIN rail is made. For example, our DIN rails are made to European DIN standards EN 50022, 50035, and 50045.
When deciding whether to go with aluminum or cold rolled steel for your DIN Rail needs, you must first consider what you want to use your DIN rail for. Where the zinc plated steel does not provide optimum protection against corrosion, anodized aluminum DIN rail works great in humid environments. But, as compared to zinc plated steel, aluminum is not as cost effective or as strong.
Due to its corrosion prohibitive plating, cost effectiveness, and strength, zinc plated cold rolled steel is the best solution for general applications. If you work in an environment where humidity is not an issue, then you will likely want to go with cold rolled steel. If you are unsure, please do not hesitate to give Industrial Control Direct a call, and we can give you our professional opinion.
DIN rail stoppers are used for preventing DIN rail devices from sliding. Two are required, one on each end of the DIN rail. 6mm wide. For 35mm DIN Rail.This version uses a screw to secure the end stop in place. Used in long DIN rail sections with many components where the DIN rail stopper (snap) may not hold.
DIN rail stoppers are used for preventing DIN rail devices from sliding. Two are required, one on each end of the DIN rail. 6mm wide. For 35mm DIN Rail. For long DIN rail sections with many components we recommend the DIN...
30A DIN rail mountable terminal block bus with 2 positions. Used to split out 24-10 gauge wiring on 30A and 50A control panels. Amperage Rating: 30AVoltage Rating: 600VWire Size: 24-10 AWGApprovals: UL (Recognized) Includes: (1) 30A terminal block End covers...
End cover for 30A DIN rail mountable terminal block bus with a single level. Required at the end of a terminal block row when the size or component changes to cover the open side of the terminal block. Approvals: UL...
These rugged plastic clips have been custom made to match the mounting holes on the SunSaver controllers and to either snap on to the middle of the rail or to slide on from the end of the rail. The clips also provide a mechanism to allow easy removal of the controller from the DIN rail without removing the clips.
Integra DIN12 is a set of 35mm slotted DIN rail, pre-cut to a length of 10.75\" and includes mounting screws. The pre-cut size is designed to mount within all 12\" wide Integra polycarbonate enclosures.
Integra DIN14 is a set of 35mm slotted DIN rail, pre-cut to a length of 12.75\" and includes mounting screws. The pre-cut size is designed to mount within all 14\" wide Integra polycarbonate enclosures.
Integra DIN18 is a set of 35mm slotted DIN rail, pre-cut to a length of 16.5\" and includes mounting screws. The pre-cut size is designed to mount within all 18\" wide Integra polycarbonate enclosures.
Integra DIN16-GEN is a set of 35mm slotted DIN rail, pre-cut to a length of 16.88\" and includes mounting screws. The pre-cut size is designed to mount within all 16\" wide Integra polycarbonate enclosures.
Integra DIN24 is a set of 35mm slotted DIN rail, pre-cut to a length of 23.63\" and includes mounting screws. The pre-cut size is designed to mount within all 24\" wide Integra polycarbonate enclosures.
Integra DIN4-IMP is a set of 35mm slotted DIN rail, pre-cut to a length of 3.82\" and includes mounting screws. The pre-cut size is designed to mount within all 4\" wide Integra polycarbonate enclosures.
Integra DIN6-IMP is a set of 35mm slotted DIN rail, pre-cut to a length of 4.5\" and includes mounting screws. The pre-cut size is designed to mount within all 6\" wide Integra polycarbonate enclosures.
Integra DIN5-IMP is a set of 35mm slotted DIN rail, pre-cut to a length of 4.88\" and includes mounting screws. The pre-cut size is designed to mount within all 5\" wide Integra polycarbonate enclosures.
With the increasingly distributed workforce in mind, 64% of organizations expect 5G to play a significant role in their network transformation to ensure secure connectivity anywhere. Take the Connected Enterprise Wireless WAN Assessment to compare your business with others.
Launching in early 2023, the Eaton DIN rail industrial UPS is designed to deliver reliable power and battery backup to industrial environments. This UPS can withstand the demanding conditions of warehouses, plants, and automated manufacturing and fabrication facilities. A rugged, compact housing enables this DIN rail mountable UPS to integrate seamlessly and securely into electrical enclosures. With both AC and DC options available, this DIN rail UPS can be deployed in any non-traditional IT environment.
The SD-404 4 bay PoE surge protector, keeps PoE switches, PoE PDs and any other IP devices safe from lightning and other forms of electrical interference. The use of surge protectors to protect sensitive and expensive equipment from lightning strikes and surges on Ethernet cables has become very important. The replacement module design allows technicians to replace modules without removing the entire unit from the din-rail. These units are fully compatible with 802.3af/802.3at/802.3bt/UPoE standards, providing protection to both Ethernet data and PoE power feed. The hardened grade PoE surge protector operates between -40C and 85C during harsh weather conditions. The SD-404 modules offer surge protection of up to 10KA.
The FuseBox ADRB is a single module DIN rail consumer unit blank. Designed to be installed in FuseBox consumer units, this blank module is the ideal solution for filling empty spaces and is commonly used to space out MCBs & RCBOs.
Introducing the FuseBox ADRB Din Rail Mounted Blank - a practical accessory for keeping your electrical equipment organized and efficient. This blank is designed to be mounted on a din rail, providing a neat and secure solution for blanking off unused spaces in electrical panels and cabinets.
Din rails are industry-standard metal rails that are used for mounting components inside of electrical control panels and cabinets. They are designed for securely attaching terminal blocks, circuit breakers, actuators, power supplies, solenoids and so on. Din rails are part of a universally interchangeable rack-mounting system that is used across countless industries around the world. The standardized widths and shapes of Din rails makes it possible for uniformity across all relevant products regardless of the manufacturer.
Din rails are made of various base metals, such as stainless-steel, aluminum, steel and copper. They have various finishes with respect to the base metal. The most common combination is zinc plated, yellow chromated steel. When selecting a Din rail, it is important to consider the environment, the enclosure material, the short circuit requirements and the components to be mounted.
There are several specific shapes and sizes of Din rails that are commonly used. TS35 (Top Hat) is the most common type of Din rail used and comes in standard sizes of 7.5 mm and 15 mm depth with 35 mm cross-width. This type is used for mounting IO controllers, circuit breakers and so on.
Din rails systems allow components to simply snap and slide into place on the rail. They save space with tight configurations and provide a convenient site for bringing internal and external wiring circuits together. They result in a neat and well-organized component layout for easy access and all around safety.
DIN rail is a mounting system used to secure electrical components to industrial control panels. In order to secure electrical components to DIN rail, the components must have a DIN rail mount. The component attaches to the DIN rail by pushing down on one side and clipping it into the DIN rail. To remove the component, a precision screwdriver is used to put in a slot that's located on the mount, lifting up, and the component pops off.
Artesyn Embedded Power' range of DIN rail mounting AC-DC power supplies consists of 8 models. Single phase in 120W, 240W, 480W and 960W with their complement in 3 phase input to cover all possible input ranges. All models designed for an industrial environment with no derating up to 60 degrees Celsius. The single-phase units are also capable of operating from a DC input in the range 90 to 375 Vdc, and the three-phase units are also capable of operating from a 450 to 760 Vdc input.
These sturdy DIN rail mounting brackets come in handy for a wide variety of projects where DIN rail is used for mounting devices. The flat mounting surface and the three mounting holes make this clip versatile for mounting devices that do not have their own DIN rail mounting clip. This clip is designed in such a way that allows it to be clipped onto standard 35mm DIN rail as well as 32mm rail. For 35mm DIN rail, these clips work with rail depths of 7.5mm orgreater.We also